Moderator: MudBug
C Products follower
--------------------------------------------------------------------------------
Just got this response to an email I sent to their engineering folks:
To: Barry Bergen
Subject: Magazine followers (AR style)
Do you make your own followers? If so what would it take to change the shape from the "offset bump" for the double stack 5.56/.223 mags to a single stack for .450 Bushmaster and .50 Beowulf, that use unmodified .223 mags now? I believe that a mag follower designed for single stack configuration for these cartridges would be conducive to better feeding of these large caliber rounds.
Thanks,
Mike
-----------------------------------------------------------------------
Mike',
There is currently tooling being constructed for the .450 Bushmaster. C Products makes booth those magazines respectively.
There will shortly be a new magazine for the .450 which will greatly improve its performance as well as the new follower.
Hope this helps
Barry Bergen
Owner/Managing Member
C Products LLC
30 Elmwood Court
Newington CT 06111
thebrassnuckles wrote:do you have a picture of a modified follower? i could figure it out with a picture
i put the single stack follower in a 30 round GI mag and at about 7 rounds it would get all jammed up and the rounds would be sitting at an angle to the feed lips.
Users browsing this forum: No registered users and 143 guests